How to use Ovuplan Dip and Read test

OVULATION TEST ITEMS

USING THE TEST

1. When you are ready to begin the test, collect your urine sample using the container supplied. Fill approximately to the level shown.

2. Then open the foil packet and remove the test strip. Discard the sachet of drying agent. Slide the foam ring onto the test strip past the arrow-marked section until the bottom of the foam ring is on the purple line.

3. Float the strip in your urine sample with the arrow-marked section submerged. Take care not to splash the result window with urine.

4. Read the result after 5 minutes have passed but before 10 minutes have passed (ie between 5 and 10 minutes). Use a timer or watch as reading the result within the specified time is critical. As the test begins to work, you may notice a pink flow moving across the window. It is important that the background is clear before the result is read.

5. Reading the result
CONTINUE TO TEST DAILY
If there is no line in the test line region or the test line is lighter than the control line, then you have not begun your LH surge and you should continue to test daily.

5. LH surge
OVULATION SHOULD OCCUR WITHIN 24 TO 36 HOURS
If the colour of the test line is more intense than or equivalent to the control line, you have detected your LH surge. Ovulation should occur within 24 to 36 hours.